LED unit
LED unit
Order no.: 1686, 168601, 1687xx
Installation instructions
1 Safety instructions
Electrical equipment must only be installed and assembled by qualified electricians.
Always follow the relevant accident prevention regulations.
Failure to comply with these instructions may result in damage to the device, fire or other
hazards.
2 Structure of the device
(2)
(1)
Figure 1
(1) Contact
bridge
(2) Plug-in
contacts
3 Function
The LED unit is used for lighting switches and push-buttons.
Correct use
The LED unit must be used in
–
rocker switches change-over, intermediate, 2pole on/off 10 AX
–
rockers switch series
–
rocker push-button and rockers push-button
Not useable for
–
rockers push-button order no. 5038 08 and group rockers push-button order no. 5034 04
–
push-button and pullcord switches, rocker switches and rocker push-buttons from the years
1985 to 1995
97-09927-000
Page 1/4
11/2011
