Handlebar
Handlebar
Handlebar
Handlebar Remote
Remote
Remote
Remote Control
Control
Control
Control Mounting
Mounting
Mounting
Mounting
Handlebar mounted trigger switch can be operated without removing your hand from the grip.
• It is recommended that the switch be installed on the left handlebar. A piece of electrical tape
around the handlebar will help prevent rotation of mount on the handle bar.
• Do NOT tighten over any hoses or cables
.
Operation
Operation
Operation
Operation
Cable
Cable
Cable
Cable In
In
In
In and
and
and
and Out
Out
Out
Out
1). To determine “ Cable Out “, turn to the “Out” position
2). To determine “ Cable In “, turn to the “In” position
3). To stop winching, release the trigger level
Freespool
Freespool
Freespool
Freespool Funtion
Funtion
Funtion
Funtion
The freespool allows rapid pay-out of the wire rope for hooking onto a load or anchor points and is
operated by a freespool shifter located on the end of the winch.
1). To engage the freespool, turn the freespool shifter counter-clockwise to the “Engaged” position.
The winch is now ready for pulling.
