4.4 Introducing changes
To introduce changes in
searched for is located.
element edited, you must
the numeric keypad presented in
including the most important
Fig. 6
User Manual_S7-1200 compressor controller
Introducing changes in the settings
To introduce changes in the settings, you must call the screen
. Then click the element you want to edit. Depending on a type of the
element edited, you must select text/graphics from the drop-down list or enter a value with
the numeric keypad presented in Fig. 6. Fig. 5 presents the screen of basic settings
including the most important parameters.
Fig. 5 Screen of basic settings.
Fig. 6 Numeric keypad for introducing the settings
17
in the settings
the settings, you must call the screen, where the parameter
Depending on a type of the
down list or enter a value with
esents the screen of basic settings
Numeric keypad for introducing the settings.
