Translated user manual (EN-V1)
METOSWR
14 / 27
6.
Transportation
6.1
External transport (model on wheels)
If the
METOSWR
needs to be transported, please follow the procedure below:
1. Wind up the hose completely.
2. Switch off the METOSWR by means of the main switch.
3. Remove the plug from the socket and wind up the cord.
4. Also disconnect the supply hose or wind it up.
5. Lock the handlebar pull handle with the locking clip.
6. Properly secure the
METOSWR
to prevent it from sliding, rolling or toppling over.
7. Ensure that the
METOSWR
remains dry and frost-free during transportation.
8. After having arrived at its destination, the
METOSWR
must be started up in
accordance with the points described at chapter 7.1.
6.2
Internal transport (model on wheels)
The
METOSWR
can also be transported indoors (in the greenhouse). Always pull the
METOSWR
by hand and proceed as follows:
1. Wind up the hose completely.
2. Switch off the METOSWR by means of the main switch.
3. Remove the plug from the socket and wind up the cord.
4. Also disconnect the supply hose or wind it up.
5. Unlock the handlebar pull handle with the locking clip.
6. Pull the
METOSWR
while holding the handlebar pull handle.
7. On arrival at the destination, the handlebar pull handle must be locked in the vertical
position with the locking clip, the
METOSWR
is then braked.
Attention!
- Always remove the plug from the socket before moving!
- Wind the cord!
- Take care with ramps and trenches
- Drive slowly and carefully!
- Put the METOSWR on the brake, use the locking clip!
