25
- Remove the flange cover (6)
For ALL models:
- Unscrew the nuts (7) securing the flange (8) and remo-
ve the flange complete with its seal.
- Clean inside the cylinder and remove any residues
through the access hole.
Once cleaned, refit all components, following the above
steps in the reverse order.
b
Tighten the nuts (7) to secure the flange (8), pro-
ceeding diagonally around the flange to apply
pressure uniformly around the seal.
- Fill the storage cylinder’s secondary circuit and check
that there are no leaks from any of the seals.
- Check the performance of the storage cylinder.
6
8
7
Summary of Contents for IDRA N DS 1500
Page 1: ...STORAGE CYLINDER IDRA DS SOLAR INSTALLATION MANUAL...
Page 27: ......
