INST
ALLA
TION MANUAL
24
4
5
1
2
EXTERNAL CLEANING
Clean the outside of the storage cylinder with a soft cloth
damped in soapy water. To remove stubborn marks, use
a cloth damped in a 50% mix of water and denatured
alcohol or a suitable cleaning product.
Dry the storage cylinder after cleaning it.
a
Do not use abrasive products, petrol or triethylene.
INTERNAL CLEANING
Removing and checking the magnesium anode
- Remove the cap (1), cover (2) and the anode insulator
disc.
- Use a 45 mm wrench to unscrew the anode plug (3).
- Check the magnesium anode for wear and replace it if
necessary.
Once cleaned, refit all components, following the above
steps in the reverse order.
NOTE: Tighten the anode plug to a torque of 25-30
Nxm.
Cleaning inside the storage cylinder
For models IDRA DS 300 - 400 - 500:
- Unscrew the four screws (4) and remove the cover (5)
3
Cleaning and removing internal components
Summary of Contents for IDRA N DS 1500
Page 1: ...STORAGE CYLINDER IDRA DS SOLAR INSTALLATION MANUAL...
Page 27: ......
