INSTALLER
10
MODELS IDRA N DS 2600
B
IDRA N DS
storage cylinders come in two separate
packages:
- The first contains the painted cylinder, protected by
a plastic bag and
arranged vertically
on a wooden
pallet.
- The second package,
supplied separately
and also
protected by a plastic bag, contains the polyurethane
insulation with its elegant outer covering, fitting insu-
lation sleeves, top cover, flange cover, identification
plates and documentation.
The following items are delivered in a plastic bag inside the
packaging:
- Instruction manual
- Bar code labels
- Hydraulic test certificate
The two magnesium anodes are supplied in a cardboard
box on the pallet.
Vertical
A
B
H
IDRA N DS
A (mm)
B (mm)
H (mm)
Weight
(kg)
2600
1300
1300
2525
620
b
The instruction manual is an integral part of the so-
lar storage cylinder. Once located, read it thoroughly
and keep it safe.
10 HANDLING
b
Wear suitable personal protective equipment and
use suitable safety devices.
b
Make sure that any lifting equipment is of adequate
capacity to lift and move the storage cylinder.
a
Do not dispose of packaging material into the envi-
ronment, or leave it within the reach of children, since
it can become a potential hazard. Dispose of packag-
ing material in compliance with applicable legislation.
MODELS IDRA N DS 1500
Cut the strap (1) located under the insulation at the zips to
remove the cylinder from the pallet.
1
1
If suitable equipment is not on hand to lift the storage cyl-
inder off the pallet using the eyebolt, proceed as follows.
- Place a platform of about half the height of the pallet
near the storage cylinder. Make sure the platform is
able to support the weight of the storage cylinder
- Remove the strap (1) then carefully rotate and slide
the storage cylinder off the pallet on to the platform
- Make sure that the storage cylinder is perfectly sta-
ble, and then remove the pallet
- Carefully rotate and slide the storage cylinder off the
platform on to the floor
- Remove the platform. Position the storage cylinder as
required.
