2
Thank you for choosing Beretta’s weekly
programmer.. This central heating control
device is easy to fit, and with correct use,
will deliver improved comfort levels in
your home whilst saving you money.
This thermostat is designed to be used
only with heating controls system with a
maximum switching load of 2A at 30VDC
or 0,25A at 230VAC or with Beretta
boilers fitting a bus protocol connection
If installing for someone else, please
ensure that the instructions are handed to
the householder.
Warning: Please read this manual prior
to installation or use.
Shock Hazard: This unit must be
installed by a competent person, in
accordance with local regulation, or other
relevant national regulations and codes of
good practice. Always isolate the AC
Mains supply before installing this unit.
CE: This product is according R&TTE
Directive 1999/5/EC
Installation warning:
This programmer can be used either as a
central heating ON/OFF thermostat and
as boiler remote control (only with
selected Beretta boilers), therefore is
mandatory to determinate the correct
working mode (denominated TYPE)
before installation and setting.
From the main menu select the TYPE
parameter and those are the following
option (the selection need the batteries to
be done).