6
ASSEMBLY
Secure the bracket with two 1/4 x 1/2" screws and nylon
insert lock nuts (item 1) (nuts on the outside).
Tighten the screws firmly.
Secure with screws
Install the arm (item 1) on the deflector (item 2) with a
1/4 x 3/4" bolt (item 3) (the head inside the chute), a
5/16" flat washer between the arm and the deflector and
a nylon insert lock nut on the outside.
DO NOT TIGHTEN COMPLETELY so that the deflector
moves freely.
Install arm
STEP 3
INSTALLATION OF THE ELECTRIC
CONTROL BOX:
NOTE
: Before choosing the ideal place to install the
control support (item 1) and control box, connect the
control box wires to the motors and to the battery (see
instructions on next page).
Use the joystick to determine which direction activates
which motor.
We suggest putting the control box on the right fender of
the tractor close to the driver’s seat or close to the
steering wheel according to your preference.
Secure the control support with two 1/4 x 3/4" bolts and
flange nuts.
Install the control box on the support.
Determine direction of joystick and position of control
box before installing the support.