5
ASSEMBLY
STEP 2
INSTALLATION OF THE ELECTRIC
DEFLECTOR KIT:
Remove the two knobs (item 1) from the deflector and
replace them by two nylon flat washers 11/32’’ and two
nylon insert lock nuts 5/16".
DO NOT TIGHTEN COMPLETELY so that the deflector
moves freely.
Remove knobs and replace with washers & lock nuts
Install the assembled electric motor on the chute with a
1/4 x 1/2" screw and a nylon insert lock nut (item 1) (nut
on the outside).
Place the base of the motor bracket parallel with the
base of the chute.
Tighten the screw firmly.
Install motor
Drill two 9/32’’ holes (item 2) in the chute by using the
bracket as a template.
BE CAREFUL, BEFORE
DRILLING THE HOLES, MAKE SURE THAT THE
BASE OF THE MOTOR BRACKET IS PARALLEL
WITH THE BASE OF THE CHUTE.
Drill holes
