background image

22

Operation

6004977_a – 28.02.2020

The slider is located on the lower edge of the control panel, 
represented by a black box between the On/Off button and 
the Power button. Each box stands for a power level from 0 
to 9 or for the corresponding number (e.g. for time setting).

The slider can be used as follows:

 

y

Direct selection of the desired output by tapping a 
specific level.

 

y

Swiping movement to the right in order to increase the 
output of the device or the adjusted value.

 

y

Swiping movement to the left in order to decrease the 
output of the device or the adjusted value.

The following function buttons are accessible via the menu 
button. The symbols are displayed after the menu button is 
pressed. In order to execute a function, the corresponding 
position under the symbol on the slider must be touched.

The control panel has fields for display of specific values or 
settings:

 

y

Cooking zone 1 to 4 (selection and display, 1-digit in each 
case)

 

y

Timer (only display, 2-digit)

 

y

Extraction (selection and display, 1-digit)

Cooking zone indicators

Display

Explanation

Power level 0 - The cooking zone is activated

Power level 9 (example)

Power / Booster

 

Double booster (alternating blinking display)

Simmer at 42 °C

Simmer at 70 °C

Simmer at 94 °C or grill function

Bridge function – display illuminates with use 
of the two left cooking zones.

 

D

“4.3.13 Bridge function” (page 29).

Automatic rapid heat-up – display illuminated 
during rapid boiling times.

 

D

“4.3.1 Automatic rapid heat-up function” 
(page 25).

Pot recognition – display illuminates if there 
is no cookware in the zone or the pot is not 
suitable for the device.
The display goes out if there is suitable 
cookware on the cooking zone.

Residual heat – display illuminates for as long 
as the cooking zone is hot after the cooking 
zone has been switched off. 
If the display is illuminated, there is a risk of 
burns.

 

y

Do not touch the cooking zone.

 

y

Do not place heat-sensitive objects on the 
cooking zone.

Summary of Contents for Downline BKF 83 DL-A









































Reviews: