16
Installation
6004977_a – 28.02.2020
☞
Align the recirculated air filter with the flap device to the
access side. When doing so, observe the specification on
the device.
☞
Adjust the recirculated air filter position.
> 20
> 100
x
15
☞
Adjust the recirculated air filter to the appropriate height:
y
Height-adjustability of at least 20 mm is possible, in
order to be able to install the shallow duct sections
afterwards.
y
The distance from the undersideseite of the
recirculated air filter to the floor is at least 100 mm.
y
The recirculated air filter can be folded up at any time
to remove the filter cartridge.
y
The recirculation filter must be set sufficiently high
that the screw-in bottom does not prevent folding
back.
☞
Determine the length (x) of the shallow duct.
☞
Unscrew the screw on the side to lower the recirculated
air filter.
x
☞
Cut the appropriate shallow duct sections. The quantity
and length must be adapted to the installation variant.
☞
Insert the shallow duct sections in the duct bends.
☞
Re-adjust the recirculated air filter to the appropriate
height.
☞
Tighten the screw on the side of the recirculated air filter.
Summary of Contents for Downline BKF 83 DL-A
Page 40: ...6004977_a 28 02 2020 ...
