Berbel BAL 150, Installation Instructions For The Models, Page: 40 / 44

40
Cleaning
6002948_a – 20.11.2019
D ATTENTION!
Danger of property damage due to improper installation!
Incorrect handling can cause components inside the device
to become damaged.
☞
Carefully insert the Allen key into the device.
☞
Secure the front panel by tightening the safety screw
from below.
☞
Plug the wall power supply’s plug into the socket.
The device is ready for operation after approximately
30 seconds.
3.5.4 Check and carry out commissioning
☞
Check that the mains cable and the electrical connection
cable are not kinked, crushed or damaged.
☞
Ensure that air outlets on the cooker hood are not closed
or covered.
☞
Check that the cooker hood is functioning correctly.
D
“5. Maintenance” (page 41).
4. Cleaning
D
ATTENTION!
Danger of damage through improper cleaning!
Sharp-edged objects, abrasive or unsuitable cleaning agents
can damage the device.
The following cleaning agents are unsuitable and must not
be used:
y Acetone
y Trichloroethylene
y Solutions on a cellulose basis (e.g. cellulose thinner)
y Artificial resin thinner
y Abrasive media
y Polishes containing silicone
y Polishes containing oil
y Wax
y Water vapour
y On painted surfaces: Microfibre cloth
☞
Keep objects that could scratch the device away from it
(e.g. rings).
☞
Use mild household cleaner (e.g. alkali-free, pH-neutral
multipurpose cleaner).
☞
Use a soft, damp cloth.
☞
Clean without exercising excessive pressure.
The instructions and information on the cleaning agent
should be observed.
☞
Clean the surfaces with a soft, damp cloth and a mild
household cleaner.
☞
Use a suitable care product to treat stainless steel
surfaces.