BEPOWEREQUIPMENT 85.403.003, User Manual, Page: 4 / 48

4
PRODUCT SPECIFICATIONS
The pressure washer being used MUST be compatible with the below specifications to
ensure proper operation.
• 3/8" Quick Connect hose coupler
• 4,000 Maximum PSI / 5,000 PSI for 85.403.008 Model
• 1,500 Minimum PSI
• 5.0 Maximum GPM
• 3.0 Minimum GPM
• Up to 200°F/82°C water temperature
• (Changing nozzles will alter the min and maxes, see NOZZLE CHART )
SAFETY
• ALWAYS review and know all the warnings and safety alerts for the pressure washer
that you are using that can be found in the pressure washer manual.
• ALWAYS be aware of where the Whirl-A-Way is being used or pointed. High-pressure
spray can cause injury or damage.
• If this type of injury occurs, DO NOT TREAT AS A SIMPLE CUT. SEEK
EMERGENCY MEDICAL ATTENTION IMMEDIATELY . If you are using
cleaning detergents, be prepared to tell the physician exactly what kind.
• Spray guns can have significant kickback. ALWAYS brace yourself and have firm
footing when operating.
• NEVER attempt to repair high-pressure components if damaged. Always replace parts.
• ALWAYS use on flat surfaces.
• WARNING: Hitting any raised obstacle with the surface cleaner can cause damage.
If performance changes, or if it begins to vibrate after impact, immediately turn off the
pressure washer. Inspect for damages and make repairs.
• ALWAYS ensure all component connections and fittings are securely fastened. High-
pressure water can turn loose fittings or spray nozzles into projectiles causing injury or
damage.
• CAUTION: If stones or debris collect in the whirl-a-way they can be cleared by tilting
it in safe direction to flush away the debris.
• ONLY use cold water pressure washers. Hot water pressure washers will cause failures
and will void warranty.
• ALWAYS be aware of surfaces that will become wet and may become slippery.
• ALWAYS wear appropriate personal safety equipment. Eye protection is especially
important.
• NEVER use without wearing foot protection.
• ALWAYS have a secure grip of the gun and stable footing.
• NEVER modify the Whirl-A-Way in any manner.
• NEVER reach under the Whirl-A-Way while it is operating.
• ALWAYS test in a safe location when first using.
PRODUCT SPECIFICATIONS AND SAFETY