8
9
Automatic Make Up Brush Cleaner Use instructions
Note: if the hole on the adapter looks slightly wider compared to the size of the
brush, simply push the brush all the way inside the adapter, the diameter of the
hole narrows gradually to allow a greater grip during rotation (d).
Fill the container with water and detergent (neutral soap, make up soap, micellar
water, etc.), paying attention not to overfill above the “Max” line marked on the side
of the container (e).
Insert the head of the brush inside the container so that it is immersed in the liquid,
and activate the rotation by keeping the power button pressed (f); release the power
button to switch the appliance off. Empty out the container and repeat the cleaning
procedure if necessary.
To dry the brushes after washing, activate the rotation inside the container while emp-
ty: the centrifugal force will push the excessive water on the outside, allowing the
bristles to dry faster.
To remove/replace the silicone adapter, hold connector tight against the main unit and
gently pull the adapter outwards.
Note: if the connector is removed by mistake, simply re-insert it by fixing it to
the small pin found at the base of the main unit (g).
When the cleaning process is over, empty out the container and rinse it, let it dry
thoroughly before storing it.
If the appliance is not used for long periods of time, remove the batteries, and store
it in a dry place away from dust and direct sunlight, preferably inside its original box.
Warning: do not immerse the main unit in water or other liquid; do not allow
water and/or detergent to penetrate inside the main unit.
Technical data
Operation: 2x AAA non rechargeable alkaline batteries (not included)
For any improvement reasons, Beper reserves the right to modify or improve
the product without any prior notice.
The European directive 2011/65/EU on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances must
not be disposed of in the normal unsorted municipal waste stream.
Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and
the environment. The crossed out “wheeled bin” symbol on the product reminds
you of your obligation, that when you dispose of the appliance, it must be separately
collected.
