Beper BC.130, Use Instructions

Page: 12 / 44

12
Bread maker Use instructions
SOME WARNINGS:
This appliance is intended to be used in household only
Do not touch hot surfaces.
To protect against electric shock, do not immerse cord, plugs, or housing in water or other liquid.
Close supervision is required during use and when the appliance is used in the presence of children.
Unplug from outlet when not in use and before cleaning. Let the appliance cool down before cleaning.
Do not use outdoors.
Do not let cord hang over edge of table or hot surface.
Do not place on or near hot and/or gas sources.
Disconnect the appliance from the socket when not in use.
Do not operate the appliance for other than its intended use.
The appliance is not intended to be operated by means of an external timer or separate remote-control system.
Always use the appliance on a flat and stable surface.
Do not operate the appliance without ingredients.
Do not operate the appliance without bread pan.
Do not touch any moving or spinning parts of the appliance when in use.
At the end of the baking, to remove the bread from the pan use only a plastic spatula. Never beat the bread pan
or use metal utensils.
Aluminium or paper card must not be inserted into the bread pan.
Never cover the bread maker when in use.
Description of the product: Fig.A
1. Lid
2. Handles
3. Window
4. Bread pan
5. Control panel
6. Housing
7. Kneading blade
Accessories:
8. Hook
9. Measuring cup
10.Misuring spoon
Use of the appliance:
As soon as the bread maker is plugged into the power supply, a beep will be heard and “3:00” appears in the
middle of the display, at the same time on the right bottom corner the number “1”, they are the default settings.
The arrows will show the default settings “Medium” and “900g”
START/STOP button:
The button is used for starting and stopping the selected baking program.
Any other button is inactivated except the START/STOP button after a program has begun.
To stop the program, press the START/STOP button for approx. 2 seconds, till a beep will be heard.
PAUSE function:
After procedure starts up, you can press START/STOP button once to interrupt at any time, the operation will be
paused but the setting will be memorized. Touch START/STOP button again to re-start the procedure. Within 10
min without touching any button, the program will continue automatically.
MENU button:
It is used to set different programs. Each time it is pressed (accompanied by a short beep) the program will vary.
Press the button continuously till the desired program will be shown on the display. The selectable programs
will be as below: