Rechargeable Vacuum Cleaner Use instructions
8
Product description
1 Charging station/wall holder
2 Wet and dry container
3 Lock button
4 On/of switch
5 Rechargeable light indicator
6 Body
7 Mains adapter
8 Crevice nozzle with brush attachment
Wall Installation
The charging station can also be installed on the wall. Please remember however that there must
be an electric socket close by.
• To do so, measure the distance between the recesses on the back and drill two holes at this di-
stance for the rawlplugs.
CAUTION:
Please ensure beforehand that you will not be damaging any electrical wiring or pipes
hidden in the wall!
Charging the Battery
• If you would like to charge up the device, push it on to the charging station.
• Contact has now been made.
• Connect the mains adapter to a 230 V/50 Hz socket.
• The charging lamp lights up when contact has been made with the mains adapter.
WARNING:
Use of Standard and Rechargeable Batteries
• Only rechargeable batteries may be charged up with the mains adapter.
• Do not replace rechargeable batteries with non rechargeable ones.
• There is a danger of explosion if you attempt to charge up non-rechargeable batteries!
_ NOTE:
• The lamp does not provide any information on the charge status of the battery.
• The charging time the fi rst time the battery is charged is 16 hours and 12 hours for each subse-
quent charge.
• After the device has charged up please disconnect the mains adapter from the socket.
Vacuuming
You can turn the device on and off with the 0/1 switch.
