EN
Dear customer!
We thank you for the choice made in favor of the home appliances brand BEON
.
5
INSTRUCTION MANUAL
SAFETY INSTRUCTIONS
•
Before turning on the power supply for the first time, check if the technical specifications of the
product indicated on the label comply with the power supply system specifications.
•
Use only for domestic purposes in accordance with these operating instructions. The device is
not intended for industrial use.
•
Do not use outdoors.
•
Always unplug the unit before cleaning, or if you are not using it.
•
In order to avoid electric shock and fire, do not immerse the device in water or other liquids. If
this happens, DO NOT TAKE the product, immediately disconnect it from the power supply and
contact the Service Center for inspection.
•
Do not use the device in the vicinity of a bath, shower or swimming pool.
•
Do not place the device near heat sources.
•
The device is not intended to be used by persons (including children) with reduced physical,
sensory or mental abilities, or if they have no experience or knowledge, if they are not under
control or instructed to use the device by a person responsible for their safety.
•
Children should be supervised to prevent play with the device.
•
Do not leave the device turned on unattended.
•
If the power cord is damaged, it must be replaced by the manufacturer or an authorized service
center or similar qualified personnel to avoid danger.
•
Do not attempt to repair the device yourself. In case of problems, contact your nearest Service
Center.
•
Keep the power cord away from sharp edges and hot surfaces.
•
Do not pull on the power cord, or twist or wind it around the device.
•
Avoid contact with moving parts.
•
Do not place the appliance near a gas or electric oven, or on a heated surface.
•
Avoid contact with moving parts.
•
Before use, check the parking mixer for foreign objects.
•
Turn off and unplug the appliance after each use.
•
If the product has been exposed to temperatures below 0ºC for some time, it should be stored at
room temperature for at least 2 hours before turning it on.
•
The manufacturer reserves the right to make minor changes to the product design without prior
notice, unless such changes have a significant effect on the safety, performance and function of
the product.
