BENZING M1 – Fancier
MENU FUNCTIONS
62
HB_BENZING-M1_ZUECHTER-E_13.doc
GANTNER Pigeon Systems GmbH
In order to link a BENZING M1 to a BENZING Station first plug the BENZING M1 into the
station. The message "Wrong Station" will be shown on the display of the BENZING M1.
Then select the menu item [
Link STATION
] in the system menu and press the button .
Confirm the next display with the button [
OK
]
. From now on the BENZING M1 and the
BENZING Station are linked together and on the
basic
display of the BENZING M1 the information
"STA" will be shown, every time it is plugged into the BENZING Station.
Note:
The linking of BENZING M1 and BENZING Station is only possible if now training or
race is in progress.
5.4.14 Master/Slave Function
[
Master/Slave
]
If you have an atis TOP device with master/slave software, you can use this with a
BENZING M1. When connecting the devices the BENZING M1 will be the main device
("master") and the atis TOP will be the "slave". This means that the BENZING M1 scans the
loft antennae and registers the arriving pigeons during a race or training flight. The atis
TOP "listens" to the BENZING M1 and also registers the pigeons which are basketed in the
atis TOP.
In order to set the master function select the menu item [
Master/Slave
] from the service
menu and press the button .
Selected setting (symbol
"
~
")
Cursor
mark
Only displayed after the setting has been
changed
L
[
] or [
]
- Move cursor mark to the desired setting
L
[ ]
- Select the marked setting -> marker "O" will be set
(to
"
~
")
L
[
OK
]
- Confirmation of the selection.
Only after this step the new
setting will be saved!
MASTER/SLAVE 11:26:09
Master/Slave:
~
Activated
.
{
Deactivated
ABBRUCH OK