manualshive.com logo in svg

BENZING M1, Manual, Page: 20 / 72

Share
Download
BENZING M1 Manual Download Page 20

BENZING M1 – Fancier 

INSTALLATION AND OPERATION

 

16

 

HB_BENZING-M1_ZUECHTER-E_13.doc 

 

GANTNER Pigeon Systems GmbH

 

 

 Figure 

3.1 – Fancier System BENZING M1 

 
 
 

When installing the device the following must be observed: 

 

• First the lazer loft antennae (PLB) must be supplied with power. After this the 

BENZING M1 will be connected. 

 

• In a fancier’s system the power supply unit must always be plugged into the 

corresponding jack of the connection cable. The socket 

 on the BENZING M1 

will not be used in this case, as power supply of the lazer loft antennae would be 
impossible. 

 

• After having plugged in the power supply unit the green LED display ‘Power 

supply’ must light up (see figure 3.1). This indicates that the power supply is 
correctly provided. 

 

• Connection to the power mains should always be provided near the antennae. 

 

• For the provision of power the included power supply unit should always be 

used or a similar power supply unit of an equivalent type. 

 

• When using the provided power supply unit only up to 3 loft antennae lazer 4 

(PLB 765), 6 lazer 3 (PLB 475) or 10 lazer 1 (PLB 170) can be connected. For 
information concerning the connection of more than three antennae please 
contact your sales agent. 

 

• Before plugging in the power supply unit please check if the installation 

corresponds to the diagram 3.1. Make sure that before connecting the 
BENZING M1 to the mains humidity has not found its way into the case of the 
BENZING M1 and that the device is being operated according to the 
conditions of use mentioned in 3.1. 

! 

DB-9 Antenna Plug 

Power Supply Unit (1.5 A)

Summary of Contents for M1









































































Reviews:

No comments