manualshive.com logo in svg

BENZING M1, Manual, Page: 19 / 72

Share
Download
BENZING M1 Manual Download Page 19

BENZING M1 – Fancier 

INSTALLATION AND INITIAL OPERATION

 

HB_BENZING-M1_ZUECHTER-E_13.doc 

15

 

GANTNER Pigeon Systems GmbH

 

3.  INSTALLATION AND OPERATION  

 
 

3.1 Conditions 

of 

Use 

 

The BENZING M1 is an electronic device running at low voltage. It should only be used 
inside. Direct contact with water (drops or splashes of water, stagnant water etc), dirt, or 
when in operation with direct sunlight should be avoided.  
 
During operation the surrounding temperature for the BENZING M1 should be between 0°C 
and +60

°

C (+32°F and +140°F) and for the lazer loft antennae (PLB) -10°C and +70

°

C (+14°F 

and +158°F). If the temperature drops to less than 0°C (+32°F) (which means that 
possibly condensed water is formed) the equipment has to be dried for approx 1 hour at a 
room temperature of 20

°

C (+68°F). Afterwards all devices can be used again 

without further problems. The storage temperature for the BENZING M1 ranges between    
-25°C and +70°C (-13°F and +158°F). 
 
If the BENZING M1 and the lazer loft antennae are operated near a power line, the 
registration of the arriving pigeons and in general the operation of the  BENZING M1 can be 
susceptible to interference. 
 
 

3.2  Installation of the Fancier System 

 
In a loft first the provided PLB connection cable will be connected to one lazer loft antenna 
(PLB) and then the remaining lazer loft antennae will be connected (see figure 3.1). Next 
the power supply unit is connected to the corresponding jack at the connection cable. This 
jack is located on the back of the connection cable’s DB-9 antenna plug (see also chapter 
2.5 - Connection Cable for Lazer Loft Antennae (PLB)” This will supply the antennae with voltage. 
At last the BENZING M1 can be connected by plugging-in the connection cable at the BENZING M1. 
 
 
 

It is of utmost importance that you observe the instructions on the package 
leaflet when installing the lazer loft antennae (PLB). 

 
The build-up of a fancier system with the BENZING M1 and lazer loft antennae (PLB) can be 
seen in figure 3.1. 
 

! 

Summary of Contents for M1









































































Reviews:

No comments