Exercise Notes
Page 21
Air Rower
Use this space to record your own exercise routine results.
Problem Solving
ROWERS
“ Computer not working”
Affects: HR2 - HR3
Solution: Check integrity of
“ Excess / uneven resistance on row arms”
Affects : HR2 - HR3
Solution : Loosen the “T” knobs and line
“ No resistance on rower ”
Affects : AR1
Solution : Check that the drive chain is
“ Row arm / handle will not pull ”
Affects : AR1
Solution : Release the drive strap from
“ No spm / counter reading”
Affects : AR1
Solution : Re-make the third connection
“Feet slip out of the footplates”
Affects : All rowers
Solution : Fit the footstraps to the
Check pickup magnet & holder
are correctly fitted into seat carriage.
Check seat carriage is fitted the correct
way round. Fit new pickup magnet. Fit new
computer.
connected correctly as per manual.
Check the positioning of the rowing rail
sensor. Replace sensor cable. Replace
computer.
computer connection.
up the brackets to the same height on each
row arm. The lower down the arm, the less
the resistance. Replace cylinder.
on the drive gear. Refit chain. Check that
the drive strap and return chord are
the main frame and connect it to the
return chord as per manual.
in line on the seat sensor cable between
the rowing rail and the main frame.
lower of the 2 positions in the footplates.