19
Bentone
165 105 13-3
5.2
Example of Basic settings
Basic settings should only be seen as setting values to get burner to start
and establish flame. Once the burner has started and established flame, it is
necessary to adjust the settings so that they are adapted to the installation
and the fuel used.
B 30 A
Burner output:
154 kW
Estimated nozzle output:
154 / 11.86*
=
13.0 kg/h
(* Calorfic value Fuel oil
=
11.86 kWh/kg)
This provides the following nozzle according to the nozzle table, (see Technical
data).
Nozzle:
3.50 Gph
Pump pressure:
10.0 bar
Setting values for 154 kW according to basic setting diagram, (see Technical
data).
Air setting:
=
8.0
Insert setting:
=
2.0
Summary of Contents for B 30 A
Page 39: ......
Page 40: ...Enertech AB P O Box 309 SE 341 26 Ljungby www bentone com...
