Partial arming of the system
This operation allows the arming of the alarm system and at the same time
excludes the zones belonging to a determined partitioning group. It is use-
ful, for example, if you want to arm the system allowing however entry into
a circumscribed zone of the protected area. (eg. the sleeping area of the
house).
Operating from the panel
Electronic key
Once a master key has been inserted in the key reader, press the button to
light up the red led.
To carry out the partitioning you must keep the key button pressed: a cyclic
scanning phase of the various configurations of exclusion groups will begin in-
dicated by the lighting up of the group leds (yellow = group A, green = group
B), when the configuration desired appears, release the button and extract the
key.
The lit up led means that the group is excluded.
Operating from a remote control key reader
The procedure is the same as for the "Electronic key" in the previous para-
graph.
Operating from the Keypad
+
The partial arming of the system is obtained entering the USER MAIN
code followed by pressing the A or B function button depending on which
group of zones you want to exclude.
+
In this case you will obtain the arming and the exclusion of the chosen
group. On the front panel you will see the indication of the armed system
(ARMED led lit up) and the indication of the zones which are excluded by
means of the exclusion leds.
OPERATIONS
13
