High Gain 2G/3G Wide Band Antenna
DESCRIPTION
The
ANT5-15
is an antenna to improve the signal reception of the cellular communicators. The antenna
kit comes with a wall mounting bracket and an adaptor cable to connect the communicator.
INSTALLATION
The
ANT5-15
is intended to be installed on a wall as indicated following (see Fig. 1).
1.
Fix bracket
1
with two raw plugs (not supplied) as shown in Fig. 1A.
2.
Completely unscrew the nut
4
and insert the antenna cable into the slot
2
(Fig. 1B).
3.
Tight the nut
4
to fix the antenna to the bracket 1 (Fig. 1C).
4.
If the communicator has a
SMA
connector, plug the antenna’s connector
9
to that connector, else, if
the communicator has a
MMCX
connector, use the adapter cable
6
as indicated in the following
steps.
5.
If you have to use the adapter cable on a metal box, use the supplied plastic washers
5
, as shown in
Fig. 1D, else, if you have to use the adapter cable on a plastic box, mount it as shown in Fig. 1E.
6.
Plug the adapter cable’s connector
7
into the communicator.
7.
Plug the antenna’s connector
9
into the adapter cable’s connector
8
.
Read the communicator’s instructions for more information about the connection of this antenna.
Bentel Security s.r.l. reserves the right to change the technical specifications of this product without prior notice.
ENGLISH
N.
Description
N
Description
1
Wall mounting bracket
6
Adapter cable
2
Hole for antenna fixing
7
Adapter cable’s MMCX connector
3
Washer for antenna fixing
8
Adapter cable’s SMA connector
4
Nut for antenna fixing
9
Antenna’s SMA connector
5
Plastic washers
10
Antenna
Table 1 -
Parts.
Frequency band (MHz)
820-894
890-960
1710-1880
1850-2170
Gain (dBi) (without cable)
0-1.5
1-1.5
0-2
0-2
VSWR
<2
<2
<1.5
<2
Impedance (Ohm)
50
Polarization
Linear
Antenna dimensions (LxØ) (mm)
330x20
Cable length (m)
15
Connector type
SMA
Protection degree
IP 67
Table 2 -
Specifications.
Summary of Contents for ANT5-15
Page 1: ...ANT5 15...
