KEYS
Setting options
Data
digital key valid on partition 1
digital key valid on partition 2
digital key valid on partition 3
digital key valid on partition 4
valid service digital key (for service mode)
valid digital key (non-service)
enable digital key for reset call queue
Ø
Insert the digital key into the selected key reader and wait for the beep. During
this phase it will be possible to program all the digital keys, and also change
the setting options displayed on the keypad. All digital keys programmed after
128 will be clones, that is, with identical features as digital key 128. Press
to exit. To read a new Random code on a digital key
Address 421
:
Step 1
Enter 421.
Step 2
Press
.
Step 3
Select key reader: 1 through 16.
Step 4
Press
.
Step 5
Insert the digital key to read the random code. A long high-tone beep will
confirm
Operation Done
.
Add.
Description
419
generates new Random code
u
420
select key reader
v
select key no.
v
set options and insert key
421
select key reader
v
insert key to read new random code
422
select key no.
v
set options
u
(Prog.)
Electronic keys
for MASTER /
SLAVE systems
A MASTER / SLAVE system must have 2 or more control panels. MASTER /
SLAVE systems are configured as follows:
1)
one MASTER control panel;
2)
one (or more) SLAVE control panel(s). Electronic keys
must be programmed
on the MASTER control panel, and can be used
on all the control panels of
a MASTER / SLAVE system
. To configure a control panel as
MASTER
:
carry out
Address 419
procedure. Only the MASTER control panel can
change the identification number (1 through 128) of electronic keys. To con-
figure a control panel as
SLAVE
: use a valid electronic key and follow
Address
421
procedure. SLAVE control panels can program the options of valid electronic
keys only. The factory default programming of the control panel is
MASTER
.
Options (Addresses 423 to 425)
Addresses 423 to 425 are for
Options
programming. During Options pro-
gramming the keys will take on the meaning shown in the following tables:
Key
OFF
= option
disabled
; Key
ON
= option
enabled
.
30
Security System Control panel
Summary of Contents for Academy 4
Page 1: ......
