600V/1000V DC Combiner Installation and Operating Instructions
950-002305-000 Rev A
7
Chapter 1
Safety Instructions
This manual contains important safety instructions for the following Bentek
Combiner equipment:
In model numbers:
v
specifies the voltage (6=600 or 10=1000).
xx
refers to the number of fuses (up to 36).
yy
refers to the fuse rating.
zz
refers to the type of enclosure (FB for fiberglass, SS for stainless steel, or
CS3 for NEMA-3R steel or CS4 for NEMA-3R/4 steel).
D specifies the amperage of the load-break disconnect unit.
S indicates the presence of the current monitoring system.
WARNING
WARNING
Disconnect all power prior to doing any work on this equipment.
AVERTISSEMENT
Déconnecter toute la puissance avant d'effectuer n'importe quel travail sur cet
équipement.
WARNING
WARNING
The installation, adjustment, or repair of Bentek Combiner equipment involves
risk of contact with potentially lethal voltages and currents. These servicing
instructions are for use by qualified personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that specified in the operating
instructions unless you are qualified to do so.
There are no user-serviceable parts inside the Combiner equipment. Refer
servicing to qualified personnel.
The enclosure door should remain closed while the Combiner is operational.
Servicing or adjustments should not be performed while the circuits are
energized.
Model BTK
v
-
xxyy
-D360-
zz
Model BTK
v
-
xxyy
-D360-S
-zz
