BV200 Plasma Viscometer Mk2/3 Customer User
Manual
Issue 9
th
Sep 2020 - Rev 1.8
Page 17 of 53
3.10.
Barcode Reader Warnings
The barcode reader contains a laser reader. Do not look directly at the beam. It is a class 2
laser product with a maximum output radiation of 1 mW. The emitted wavelength is 630-680
nm to IEC 825-1 (1993)
The barcode reader contains a laser reader.
3.11.
EMC Statement
The BV200 complies with the emission and immunity requirements described in documents
IEC61326-1 and 61326-2-6.
The device is classified as Group 1 Class A, as specified in CISPR 11:2009, Clause 5. It does
not emit any dangerous or significant RF energy. As a precaution however, the following
phrase is brought to the users‟ attention:
“This equipment has been manufactured and tested to CISPR 11 Class A. In a domestic
environment it may cause radio interference, in which case, you may need to take measures to
mitigate the interference.”
As a general precaution, the electromagnetic environment should be evaluated prior to
operation of the equipment. If in doubt, please consult the Benson Support Desk.
Do not use this device in close proximity to sources of strong electromagnetic radiation (e.g.
unshielded intentional RF sources), as these can interfere with the proper operation.
3.12.
IVD Statement
The BV200 is an IVD (In Vitro Diagnostic) device for use in a clinical laboratory environment. It
is not a personal self-testing device.
3.13.
Disposal or Decommissioning of the Viscometer
Type of Warning
Precaution
The Viscometer and its
component parts are to be
considered a Biohazard
A viscometer or any part or sub component must be
decontaminated before transporting or disposal.
Benson Viscometers is committed to the WEEE
Directive and as such will decommission,
decontaminate, collect and, when suitable will
recycle viscometer components that are useful and
serviceable.
Please contact the Benson Viscometers Support
Desk for more information.
The Anti-Biological Growth
Reagent is toxic if undiluted
The anti-biological growth reagent used comprises
0.02% Sodium Azide in the LOW, HIGH, and
CHECK reagents, so is not toxic at this level but
users should be aware of the hazard.
Before disposal, the viscometer must be cleaned
and certified as free of toxic contamination. This also
applies to any parts being disposed of.
