BENSON BENDX ACHW 34, Operation Manual

Page: 16 / 33

MINTENANCE&SERVICING SPACE
AIR FLOW DIRECTION
CAUTION: Do not install unit near the door way
beacause excessive fresh air cause
panel condensation on the unit.
Fig. 1
(A) INDOOR UNIT
Install the fan coil (indoor) unit at a location with following requirements
•Location is suitable of wiring,piping and drainage.
•No obstruction of air flow into and out of unit where cooler air can be evenly distributed.(See fig.1)
•Ensure that air discharge is not short circuited with air intake.
•Ensure that wall is sufficiently strong
、
rigid
、
flat,perpendicular and vibration free.
•Where air filter can be slided in or out easily
•Where there is not danger of flammable gases (to close other Gas appliances)
•Where maintenance can be carried out eazierly (suggested One Meter above ground level) .
•Also to take into consideration a place for the installation of the Hot Water System Manual switch
if it is required.
1) SELECTION OF LOCATION AND SPACE
1 4