BENRUBI IZZY PG-900, Instruction Manual

Page: 31 / 34

30
Ears treatment
1. Clear the outer ear channel.
2. Attach the nose/ear/eyebrow trimmer (4) on the body of the device.
3. Turn on the device by pressing the On/Off switch (12).
4. Move the tip of the trimmer gently around the ear to remove the hairs. Carefully insert the tip
of the trimmer on the outer ear channel.
CAUTION: Do not insert the trimmer more than 0.5cm into the ear canal as this could
damage the drum.
5. When the nose treatment is complete, press the on/off switch (12) again.
6. Remove the nose/ear/eyebrow trimmer (4).
7. Clean the nose/ear/eyebrow trimmer and the device before storing it (see "Cleaning and
care").
Eyebrows treatment
• Use the device to cut individual eyebrow hairs.
• Do not use the device to define or trim the entire eyebrow.
• Never try to trim your eyelashes.
• Do not use the device very close to your eyes!
1. Attach the nose/ear/eyebrow trimmer (4) on the body of the device.
2. Turn on the device by pressing the On/Off switch (12).
3. Move the tip of the trimmer along the edge of the eyebrow from the base of the nose towards
the outer tip of the eyebrow.
4. When the eyebrow treatment is complete, press the on/off switch (12) again.
5. Remove the nose/ear/eyebrow trimmer (4).
6. Clean the nose/ear/eyebrow trimmer and the device before storing it (see "Cleaning and
care").
Cleaning and Care
Make sure the appliance is switched off before cleaning.
After each use:
• Brush the residues from hair.
• Cleaning should be done only with a soft brush, such as the one is provided in the packaging
of the device.
• Use the lubricating oil for the blades.
• Do not use abrasive or corrosive cleaners for cleaning the body of the device and accessories.
• Never use compressed air to clean the cutting heads and cutting guides.
Full size trimmer, precision trimmer, nose/ear/eyebrow trimmer, body hair trimmer
• Clean the head and the cutting guide with the brush.
• Keep them in the storage base (16) after each use.
Cutting guides, body cutting guide
• Clean the accessories and the cutting guides with the brush.
• Keep them in the storage base (16) after each use.