![background image](http://html.mh-extra.com/html/benq/w1400/w1400_user-manual_2733761043.webp)
43
Important safety instructions
Picture -- Basic menu
Function
Description
Preset Mode
Pre-defined picture modes are provided so you can optimize your projector
picture set-up to suit your program type. See
for details.
User Mode
Management
Selects a preset mode that most suits your need for the picture quality and
further fine-tune the picture based on the selections listed below. See
the User 1/User 2/User 3 mode" on page 27
for details.
Brightness
Adjusts the brightness of the picture. See
"Adjusting Brightness" on page 28
for
details.
Contrast
Adjusts the degree of difference between dark and light in the picture. See
"Adjusting Contrast" on page 28
for details.
Color
Adjusts the color saturation level -- the amount of each color in a video
picture. See
for details.
Tint
Adjusts the red and green color tones of the picture. See
for details.
Sharpness
Adjusts the picture to make it look sharper or softer. See
for details.
Flesh Tone
See
"Adjusting Flesh Tone" on page 29
for details.
Color Temperature
There are several color temperature settings available. See
for details.
Frame Interpolation
Enhances picture smoothness and clarity using motion estimation/motion
compensation technology. You can also manually press / to decide its
degree.
Lamp Power
Sets the projector lamp power mode as
Normal
,
Economic
, or
SmartEco
.
See
"Setting Lamp Power as Economic or SmartEco" on page 50
for details.
Advanced...
Black Level
Sets the picture grayscale as
0 IRE
or
7.5 IRE
for details.
Clarity Control
Adjusts the picture clarity. See
"Controlling image clarity" on page 30
for
details.
Color Temperature Fine Tuning
See
"To save and leave the settings, press MENU/EXIT." on page 30
for details.
Gamma Selection
See
"To save and leave the settings, press MENU/EXIT." on page 30
for details.
Brilliant Color
See
"Adjusting Brilliant Color" on page 31
for details.
Color Management
See
for details.
Reset Picture Settings
Returns all settings in the
Picture -- Basic
menu to the factory preset values.
See
"Resetting the picture mode" on page 28
for details.