![background image](http://html.mh-extra.com/html/benq/w1400/w1400_user-manual_2733761030.webp)
30
Important safety instructions
Advanced picture quality controls
There are more advanced functions in the
Picture -- Basic
>
Advanced...
and
Display
menus to be
adjusted to your preference. To save the settings, just press
MENU/EXIT
to leave the OSD menu.
Setting Black Level
Highlight
Black Level
in the
Picture -- Basic
>
Advanced...
menu and press / on the projector
or remote control to select
0 IRE
or
7.5 IRE
.
The grayscale video signal is measured in IRE units. In some areas which use NTSC TV standard, the
grayscale is measured from 7.5 IRE (black) to 100 IRE (white); however, in other areas where PAL
equipment or Japanese NTSC standards are used, the grayscale is measured from 0 IRE (black) to 100 IRE
(white). We suggest that you check the input source to see if it is with 0 IRE or 7.5 IRE, then select
accordingly.
Controlling image clarity
You may have static or noisy projected pictures.
To achieve better picture clarity:
1. Highlight
Clarity Control
in the
Picture -- Basic
>
Advanced...
menu and press
MODE/
ENTER
on the projector or remote control to display the
Clarity Control
page.
2. Press / to select the item you want and press / to set the desired value.
•
Noise Reduction
: Reduces electrical image noise caused by different media players. The higher
the setting, the less the noise.
•
Detail Enhancement
: Sharpens the image. The higher the setting, the more details the image
reveals.
Setting a preferred color temperature
To set a preferred color temperature:
1. Highlight
Color Temperature
in the
Picture -- Basic
menu or press
COLOR TEMP
on the
remote control to select
Lamp Native
,
Warm
,
Normal
, or
Cool
by pressing / on the
projector or remote control.
2. Highlight
Color Temperature Fine Tuning
in the
Picture -- Basic
>
Advanced...
menu and
press
MODE/ENTER
or press
FINE TUNE
on the remote control. The
Color Temperature
Fine Tuning
page displays.
3. Press / to highlight the item you want to change and adjust the values by pressing / .
•
Red Gain
/
Green Gain
/
Blue Gain
: Adjusts the contrast levels of Red, Green, and Blue.
•
Red Offset
/
Green Offset
/
Blue Offset
: Adjusts the brightness levels of Red, Green, and Blue.
4. To save and leave the settings, press
MENU/EXIT
.