![background image](http://html.mh-extra.com/html/benq/w1070/w1070_user-manual_2735031051.webp)
51
Using the projector
Resetting the lamp timer
Do not reset the lamp timer if the lamp has not been replaced as this could cause damage.
13. After the start-up logo, press
MENU/EXIT
and then press / until the
System Setup :
Advanced
menu is highlighted.
14. Press to highlight
Lamp Settings
and press
MODE/ENTER
. The
Lamp Settings
page displays.
15. Highlight
Reset Lamp Timer
and press
MODE/ENTER
. A warning message displays asking if you
want to reset the lamp timer. Highlight
Reset
and press
MODE/ENTER
. The lamp time will be
reset to "0".
10. Replace the lamp cover on the projector.
11. Tighten the screw that secures the lamp cover.
•
Loose screw may cause a bad connection, which could result in malfunction.
•
Do not over tighten the screw.
12. Connect the power and restart the projector.