42
Using the projector
Picture
menu
Function
Description
Preset Mode
Pre-defined picture modes are provided so you can optimize your projector
picture set-up to suit your program type. See
"Selecting a preset mode" on
page 30
for details.
User Mode
Management
Selects a preset mode that most suits your need for the picture quality and
further fine-tune the picture based on the selections listed below. See
"Setting
the User 1/User 2/User 3 mode" on page 30
for details.
Brightness
Adjusts the brightness of the picture. See
"Adjusting Brightness" on page 31
for
details.
Contrast
Adjusts the degree of difference between dark and light in the picture. See
"Adjusting Contrast" on page 31
for details.
Color
Adjusts the color saturation level -- the amount of each color in a video
picture. See
"Adjusting Color" on page 31
for details.
Tint
Adjusts the red and green color tones of the picture. See
"Adjusting Tint" on
page 32
for details.
Sharpness
Adjusts the picture to make it look sharper or softer. See
"Adjusting Sharpness"
on page 32
for details.
Color Temperature
There are several color temperature settings available. See
"Selecting a color
temperature*" on page 32
for details.
Lamp Power
Selects the projector lamp power between
Normal
,
Economic
and
SmartEco
modes.
Advanced...
Black Level
Sets the picture grayscale as
0 IRE
or
7.5 IRE
. See
"Setting Black Level" on
page 33
for details.
Clarity Control
See
"Controlling image clarity" on page 33
for details.
Color Temperature Fine Tuning
See
"Setting a preferred color temperature" on page 33
for details.
Gamma Selection
See
"Selecting a Gamma setting" on page 33
for details.
Brilliant Color
See
"Adjusting Brilliant Color" on page 34
for details.
Color Management
See
"Color Management" on page 34
for details.
Reset Picture Settings
Returns all settings in the
Picture
menus to the factory preset values. See
"Resetting the picture mode" on page 31
for details.
