34 Menu
operation
HDMI
Settings
•
HDMI Format
: Selects a suitable RGB color range to correct the color
accuracy.
•
Auto
: Automatically selects a suitable color range for the incoming HDMI
signal.
•
RGB Limited
: Utilizes the Limited range RGB 16-235.
•
RGB Full
: Utilizes the Full range RGB 0-255.
•
YUV
: Utilizes the YUV color range.
•
HDMI Equalizer
: Adjusts the equalizer gain settings for an HDMI signal. The
higher the setting, the stronger the gain value. If there are more than one HDMI
port on the projector, select the HDMI port first before adjusting the value.
•
HDMI EDID
: Allows you to adjusts EDID settings for each HDMI input.
•
Electronic Control
: To enable or disable the HDMI Electronics Control
function.
•
Power On Link
/
Power Off Link
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, you can set the behavior of powering on/off between the device and
the projector.
Password
See
Utilizing the password function on page 17.
Key Lock
With the control keys on the projector and remote control locked, you can prevent
your projector settings from being changed accidentally (by children, for example).
When the
Key Lock
is on, no control keys on the projector will operate except
POWER
.
To release panel key lock, press and hold (the right key) on the projector or
remote control for 3 seconds.
If you turn off the projector without disabling panel key lock, the projector will still be in locked
status the next time it is turned on.
LED Indicator
You can turn off the LED warning lights. This is to avoid any light disturbance when
viewing images in a dark room.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain:
Picture Mode
,
User Mode Management
,
Brightness
,
Contrast
,
Color
,
Tint
,
Sharpness
,
Advanced
,
Projector Position
,
Source Rename
, and
Password
.
From Projector
When the projector is turned on/off, the connected
device will be activated/shut down, too.
From Device
When the connected device is turned on/off, the
projector will be activated/shut down, too.
