BenQ V37C, Quick Start Manual, Page: 8 / 48

Section 1: Quick Start Guide 6
En
gli
sh
Test the remote control
7. Setting up OSD (On-Screen Display) menu language and
TV channels
When first turned on (and until tuned), the "First Turn On" menu will display:
Before you can use your TV to view TV programs, you need to let it search for and tune TV
station programs appropriate to your region. This process only needs to be done when the TV
is newly installed, or whenever you install it in a new location. You also need to select your
language for the on-screen display (OSD) menu for convenience of operation.
1. Press
or on the remote control to select Language, and then press or to select
your language.
2. When you select a Language, the Country and TV Standard items will change
automatically to suit. If your country is not displayed in the Country item, you can press
or to select it and then press or to select your country. If Others is selected as the
Country, you will also need to select the TV broadcast standard suitable for your region.
3. Press or to select Auto Installation and then press OK. After a short pause, the display
will start searching for available channels and tune and store them for you. This may take
several minutes, depending on the available TV channels in your local reception area.
Please allow the display to complete this tuning process.
You can alter the settings in the future using the OSD menu. See "On-Screen Display (OSD)
menu" on page 28 for more information.
Press Power/standby on the remote control (as highlighted in the
illustration). The TV should turn on, and the power indicator change to
green. If so, progress to the next step ( 7. Setting up OSD (On-Screen
Display) menu language and TV channels ) below.
If the TV does not turn on, first check that the power is available (the
power indicator will be lit red). If so, try pressing
(Power/standby) on
the right side of the TV. If the TV turns on by this method, the problem
lies with the remote control.
Secondly, check that the remote control batteries are properly installed.
If need be, replace the batteries with new ones or known good ones.
See
"Troubleshooting" on page 44 for further assistance.
To turn off the TV, press (Power/standby) on the right side of the TV,
or Power/standby on the remote control again, and the TV will
return to standby mode (the power indicator will turn red.)
Language English
Country UK
Standard BG
Auto Installation>
Back
BACK
First Turn On