BenQ V37C, Quick Start Manual, Page: 37 / 48

On-Screen Display (OSD) menu 35
Eng
lish
2. If the Country menu item is set to Other, you should press or to select a TV standard
according to your region.
3. Press to highlight Selected PR and then press the program selection buttons on the remote
control to input the TV program you want to set up.
4. Press to highlight Frequency and then press or to start the tuning system. If the tuned
program is incorrect, press or again until your desired program is located. You can
directly input the frequency using the numeric keys if you wish.
5. Press to highlight Fine Tune and then press or to adjust the reception of TV signal
(only necessary where the image or sound reception is poor).
6. If the SCART signal input is connected, press to highlight Decode and then press or to
select from the following options:
• On: Select this option if an external decoder Set-Top-Box (STB) is being used.
• Off: Select this option if no external decoder STB is being used.
7. Press
to highlight Text Code and then press or to select a code format for the Teletext
function.
8. Press to highlight Store on Prog. and then press OK to save this program to the TV
program memory.
9. Press MENU to close the menu.
Editing programs
You can delete unwanted programs, add a program name and change the program position
number.
This option is not possible when the Child Lock is activated. See "Child Lock" on page 36 .
Naming a program
1. In the TV menu, press or to select Program Edit and then press OK. The following
Program Edit menu will appear.
2. Press to select Selected PR, and then press the program selection buttons on the remote
control to select the program you wish to name.
3. Press to highlight Edit Name then press OK.
4. Press or to highlight the character you want to edit, and then press or to change it
to your desired character.
5. Repeat step 4 to edit other characters.
6. Press OK to store the name.
7. Press MENU to close the menu.
Swapping programs
1. In the TV menu, press or to select Program Edit and then press OK.
2. Press to select Selected PR, and then press the program selection buttons on the remote
control to select the program you wish to relocate to a different position.
3. Press to highlight PR Swap, and then press the program selection buttons on the remote
control to select the new location for the program. Two digit entry is required. For example,
Selected PR 12
Edit Name ------
PR Swap 01
PR Lock Off
PR Delete
Back
BACK
Program Edit