![background image](http://html.mh-extra.com/html/benq/sx912/sx912_user-manual_2735005012.webp)
Introduction
12
Remote Control
1.
ON /
OFF
Toggles the projector between standby
mode and on.
2.
Source selection buttons
Selects an input source for display.
3.
Keystone/Arrow keys (
/
▲
Up,
/
▼
Down)
Manually corrects distorted images
resulting from an angled projection.
4.
MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
5.
◄
Left/
Decreases the projector volume.
6.
ECO BLANK
Used to hide the screen picture.
7.
LASER
(No available in Japan region)
Emits visible laser pointer light for
presentation purposes.
8.
ZOOM+/ZOOM-
Magnifies or reduces the projected
picture size.
9.
ASPECT
Selects the display aspect ratio.
10. FREEZE
Freezes the projected image.
11. NETWORK SETTING
Displays the
Network Settings
OSD
menu.
12. Numeric buttons
Enters numbers in network settings.
Numeric buttons 1, 2, 3, 4 cannot be pressed
when asked to enter password.
13. NETWORK
Selects Network Display as the input
signal source.
14. AUTO
Automatically determines the best
picture timings for the displayed image.
15.
►
Right/
Increases the projector volume.
When the On-Screen Display (OSD)
menu is activated, the #3, #5, and #15
keys are used as directional arrows to
select the desired menu items and to
make adjustments.
16. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
17. SOURCE
Displays the source selection bar.
18. PAGE +/PAGE -
Operate your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint).
19. MIC/VOL +/MIC/VOL -
The function is not available on this
projector.
5
6
11
16
17
19
22
13
1
2
3
4
7
14
10
21
15
8
9
18
20
3
12