BenQ SJ4231, User Manual

Page: 25 / 54

E
n
g
li
sh
Freeze image on screen
Press / once to stop the screen at the current image, and press again
to resume the screen playing.
Use the sleep timer
1. Press buton on the remote control to activate the sleep timer
function.
2.
Press the button again to set the time. The setting will increase by 15
minutes for each press, and can be set to 60 minutes max.
Your TV will be put into standby mode when the time is up, particularly
useful when you want your TV turn off by itself.
• This function allows you to stop the screen at the current image. However
the current video will keep running at the background, and the screen will
resume playing from the video signal received at the moment you cancel the
funtion, not from the freezed image.
• In order to avoid possible “image retention“ or “screen burn-in“ on the LCD
screen, it is recommended that you change the aspect ratio from time to time,
and not to display a still image for more than two hours.
Mode Description
Standard Suitable for environments with normal lighting
condition.
Cinema
Suitable for darker environments. The contrast of the TV
display will be adjusted to lower level for better view.
Dynamic
Suitable for brighter environments. The contrast of the TV
display will be adjusted to higher level for better view.
Game
Suitable for playing game. The Saturation of the TV display
will be adjusted to lower level.
Personal Your own customised picture mode.
21
Using your remote control Using your remote control 22
Select a picture mode
The Preset button on your remote control allows you to select a
picture mode from following options according to your need:
Display information for current input source
Press button on the remote control to display the information for the
current input. The information displayed will vary with the type of current
selected input.