BenQ SE2231, User Manual And Quick Start Manual, Page: 46 / 50

Eng
lish
Reference 43
Supported HDMI input signal resolutions
Resolution
H-Frequency
(KHz)
V-Frequency
(Hz)
Clock Frequency
(MHz)
Note
640 × 480 31.468 60p 25 EDTV 640 x 480p
720 × 480 15.735 60i 13.5 SDTV 480i
720 × 480 31.468 60p 27 EDTV 480p
720 × 576 15.625 50i 13.5 SDTV 576i
720 × 576 31.25 50p 27 EDTV 576p
1280 × 720 45 60p 74.25 HDTV 720p
1280 × 720 37.5 50p 74.25 HDTV 720p
1920 x 1080 28.13 50i 74.25 HDTV 1080i
1920 x 1080 33.75 60i 74.25 HDTV 1080i
1920 x 1080 56.25 50p 148.5 HDTV 1080p
1920 x 1080 67.5 60p 148.5 HDTV 1080p

•
Resolutions outside of these tables are not recognised and will not be displayed.
•
When you connect the display to a PC, you should adjust the resolution in the display properties of the
computer to closely match the native resolution of the display (for example, 1920 x 1080 pixels).
•
To view the best quality picture when using the PC input, you will then need to instruct the display to
calibrate itself to the PC signal timing. To do so, select 'Auto' in the 'Picture' menu. See "Auto Adjust"
on page 39.
Setting up appropriate output resolution on PC
Before connecting the display to a PC to display PC video, please follow the
instructions below (in Windows XP for example) to setup appropriate output
resolution.
1. On Windows Desktop, right-click and select Properties from the menu that appears.
2. Click the Settings tab in the window that follows.
3. Drag the Resolution slider and select a compatible resolution according to "Supported
PC (D-Sub/DVI) input signal resolutions" on page 42. If your PC supports it, select
1680× 1050 as the output resolution for the best result.
4. Click OK to save the setting and close the window.
5. Press 信号选择 on the remote control and use
▲▼
to select the PC input then
press OK.