BenQ SE2231, User Manual And Quick Start Manual, Page: 25 / 50

Eng
lish
22 Using the remote control
Changing channels
Selecting a program directly
To select a single-digit program number, press the corresponding channel selection
button. For example, to select program 8, press .
To select a double-digit program number, press 100/-
确认 ( 确认 -/--) first, and then use
the channel selection buttons to press the channel number. For example, to select channel
28, press 100/-
确认 ( 确认 -/--), and then press , .
Changing channels sequentially
Press or on the remote control, or
▲
CH or CH
▼
on the TV to sequentially
navigate through all available channels.
Returning to the previous selected channel
The Recall ( 返回 ) button on the remote control allows you to quickly switch between
the current selected channel and the previous one.
Selecting a picture modes
To select a picture mode, press 图像模式 on the remote control. This enables you to select
from the following settings:
Picture mode Description
Standard Suitable for viewing in environments with normal lighting condition.
Cinema Suitable for darker environments. The contrast of the TV display will
be adjusted to lower level for better view.
Personal Your own customised picture mode.
Dynamic Suitable for brighter environments. The contrast of the TV display will
be adjusted to higher level for better view.
Freeze image on screen
Press 画面冻结 once to stop the screen at the current image, and press again to resume
the screen playing.


This function allows you to stop the screen at the current image. However the current video
will keep running at the background, and the screen will resume playing from the video signal
received at the moment you cancel the funtion, not from the freezed image.

In order to avoid possible “image retention“ or “screen burn-in“ on the LCD screen, it is
recommended that you change the aspect ratio from time to time, and not to display a still image
for more than two hours.
Using the sleep timer
The sleep timer is useful if you want the display to automatically to go into standby mode
after a set period of time. Press
睡眠定时 repeatedly on the remote control to select the
sleep timer from Off to 120 minutes.
Display information for current input source
Press 信息 button on the remote control to display the information for the current
input. The information displayed will vary with the type of current selected input.