![background image](http://html1.mh-extra.com/html/benq/professional-pb8253/professional-pb8253_user-manual_2734945014.webp)
Introduction
14
Remote control
1.
Power
Toggles the projector between standby
mode and on.
When the projector is in standby mode,
press once to turn the projector on.
When the projector is on, press twice to
turn the projector to standby.
See
"Start up" on page 30
and
"Shutting
down the projector" on page 40
for details.
2.
ASPECT
Selects an image aspect ratio to suit the
input signal. See
"Selecting a preset
mode" on page 35
for details.
3.
SOURCE
Sequentially selects the input signal
Analog RGB, DVI-A, DVI-D, Analog
YPbPr, S-Video, or Composite Video.
See
"Switching input signal" on page 31
for details.
4.
UP, DOWN
When the On-Screen Display (OSD) is
activated, press UP to exit and save
the menu settings.
Press DOWN to open the OSD
menu and move the selection focus up
and down. See
"Using the menus" on
page 42
for details.
5.
MUTE
Toggles the projector audio between on
and off.
6.
Left, Right
Correct keystoning at the top or
bottom of the projected image.
When the on-screen menu is activated,
moves the selection focus left or right,
or make adjustments.
See
"Correcting keystone" on page 34
and
"Using the menus" on page 42
for
details.
7.
AUTO
Automatically determines the best
picture settings for the displayed
image. See
"Auto-adjusting the image"
on page 32
for details.
8.
MENU
Turns the On-Screen Display (OSD)
menu on. Exits and saves the menu
settings. See
"Using the menus" on
page 42
for details.
1
2
3
4
5
6
7
12
13
14
15
6
16
4
9
10
11
17
19
20
8
18
I