20
Basic Operation
Selecting Aspect Ratio
Q
Select an aspect ratio to suit the format of the video signal. There are five aspect
ratios available:
1. ANA (ANAMORPHIC): Scales an image so that it is displayed in the center of
the screen with a 16:9 aspect ratio.
2. Standard (4:3): Scales an image so that it is displayed in the center of the screen
with a 4:3 aspect ratio.
3. LB (LETTERBOX): Enlarges an image with letterbox format to display it in full-
screen format with a 16:9 aspect ratio. The upper and lower portions of the
image are cropped. Use this setting for Cinemascope and Vista video wide screen formats.
4. THRO (Through): One-to-one mapping is performed on the input signal without any scaling with the
image displayed at the center of the screen.
5. WIDE: A 4:3 aspect ratio image is enlarged NON-linearly in horizontal direction to accommodate 16:9
full-screen display.
Q
Refer to page 25 for more information.
Selecting the Video Memory
Q
Press the video memory key on the remote control to recall the settings directly.
Q
There are four video settings : MEMORY 1, MEMORY 2 and MEMORY 3 and
DEFAULT. The DEFAULT key can be used to restore the default setting for the
current input source.
Q
Refer to page 26 for more information.
Setting Menu
Q
Press the MENU button to turn the on-screen display menu on or
off.
Q
Use the ARROW buttons (
c
/
e
/
d
/
f
) to select items in the
menu or to make various adjustments.
Q
Press the ENTER button to enter the setting for the current items
in the menu, or press EXIT to leave and save the settings for the
current items in the menu.
Q
Refer to page 23 for more information.
