14 Overview
Remote Control
Notes on Remote Control Operation
Q
Make sure that there is nothing between the remote control and the IR sensor on the projector that
might obstruct the infrared beam.
Q
The effective range of the remote control is up to 8 meters from the front of the projector or 8 meters
from the rear of the projector. The remote control must be held at an angle within 30 degrees of the
projector’s IR remote control sensor.
EXIT
Exits and saves any changes made
using the menu. (Refer to page 23 for
more information.)
Memory (1, 2, 3 and default) buttons
Restores settings saved in memory
locations 1, 2 and 3 or restores the
default settings for the current input
source. (Refer to page 26 for more
information.)
LIGHT: Turns the remote control’s
backlight on.
POWER ON/OFF
Hold ON down for ONE second to
turn the projector on. Press OFF to
turn the projector off. (Refer to pages
19 and 21 for more information.)
ARROWS (
c
/
e
/
d
/
f
)
Used to select the desired menu or to
make adjustments.(Refer to page 23
for more information.)
ENTER
Opens the selected items of the
menu. (Refer to page 23 for more
information.)
MENU
Turns the on-screen display control
menu on or off. (Refer to page 23 for
more information.)
SCREEN
c
/
d
: Control the screen
up or down directly. These functions
are only available for BENQ's
accessory screen.
Aspect buttons
Selects the image aspect ratio to suit
the input signal. (Refer to page 25 for
more information.)
Source buttons
Selects an input source to display on
the projector. (Refer to page 24 for
more information.)
Picture quality adjustment buttons
(Refer to page 23 for more
information.)
