![background image](http://html1.mh-extra.com/html/benq/pb8260-xga-dlp-projector/pb8260-xga-dlp-projector_user-manual_2734925016.webp)
Introduction
12
Installing or Replacing the Batteries
•
Avoid excessive heat and humidity. There may be danger of damage to the remote and
injury to those nearby if the batteries are incorrectly replaced.
•
Replace only with the same or equivalent type recommended by the manufacturer.
•
Dispose of the used batteries according to the manufacturer’s instructions.
•
Never throw a battery into a fire.
•
If the batteries are dead or if you will not be using the remote control for a long time,
remove the batteries to prevent battery acid from leaking into the battery compartment.
Push and open the
battery compartment
lid in the direction
shown.
1
Install batteries as
indicated by the
diagram inside the
compartment.
2
Position the lid over
the compartment
and snap it back
into place.
3