BenQ PB8250 - XGA DLP Projector, Service Manual

Page: 25 / 89

Installation
Choosing a Location
Your projector is designed to be installed in the four installation configurations shown here: Floor
front, Ceiling front, Floor rear, Ceiling rear. Your room layout or personal preference will dictate
which installation configuration you use.
If you place the projector above or below the screen, you have to tile it down or up to center the
image on the screen, in these situations image distortion will occur. Use the Keystone function to
correct the distortion. See keystone correction.
Making Connections
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
24