29
Menu operation
System
Operation
Settings
Instant Restart
Allows you to restart the projector immediately within 90 seconds after turning it
off.
Security
Settings
Utilizing the password function on page 19
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can connect
the projector using a suitable RS-232 cable and update or download the projector’s
firmware. This function is intended for qualified service personnel.
PointWrite
Touch Unit
Disables or enables "Type A connector" 5V power output for PointWrite Touch
Module. This function is only available when a PC signal (analog RGB or HDMI) is
selected
Reset Settings
Returns all of the adjustments you’ve made for the
Settings
menu to the factory
preset values.
Language
Sets the language for the On-Screen Display (OSD) menus.
Standby
Settings
•
Monitor Out
: Allows the projector to output a VGA signal when it is in standby
mode and the
PC 1
jack and the
MONITOR OUT
jack are correctly connected
to devices.
Background
Settings
•
Background
:
Sets the background color for the projector.
•
Splash Screen
:
Allows you to select which logo screen will be displayed during
projector start-up.
Menu Settings
•
Menu Type
: Switches to the
Basic
OSD menu.
•
Menu Display Time
: Sets the length of time the OSD will remain active after
your last key press.
Factory
Default
Returns all settings to the factory preset values.
The following settings will still remain:
Keystone
,
Projector Installation
,
Lamp Timer
,
High
Altitude Mode
,
Security Settings
,
Baud Rate
.
Reset System
Returns all of the adjustments you’ve made for the
System
menu to the factory
preset values.