BenQ MX750, User Manual

Page: 11 / 99

Introduction 11
Controls and functions
Projector
6. AUTO
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 31 for
details.
7. Power/POWER indicator light
Toggles the projector between standby
mode and on.See
"Starting up the
projector" on page 30 and "Shutting down
the projector" on page 69 for details.
Lights up or flashes when the projector is
under operation. See
"Indicators" on page
90 for detail.
8. TEMPerature indicator light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 90 for details.
9. Right/
When the On-Screen Display (OSD)
menu is activated, the #2, #3, and #9 keys
are used as directional arrows to select the
desired menu items and to make
adjustments. See
"Using the menus" on
page 33 for details.
Activates panel key lock. See "Locking
control keys" on page 45 for details.
10. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See
"Indicators" on page 90 for
details.
11. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 36 for
details.
1. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
2. Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 32 for
details.
3. Left/
Starts the FAQ function. See "Utilizing FAQ
function" on page 44 for details.
4. MODE/ENTER
Selects an available picture setup mode. See
"Selecting a picture mode" on page 39 for
details.
Activates the selected On-Screen Display
(OSD) menu item.
See "Using the menus"
on page 33 for details.
5. BLANK
Used to hide the screen picture. See
"Hiding
the image" on page 44 for details.
BLANK
BLANK
7
6
2
3
5
4
1
2
8
9
10
11
I
I