![background image](http://html1.mh-extra.com/html/benq/mx613st/mx613st_product-service-manual_2734828057.webp)
57
Interface Settings
RS-232 protocol
Baud Rate
115200 bps (default)
Changeable settings in User OSD
(9600/19200/38400/57600/115200)
Data Length
8 bit
Parity Check
None
Stop Bit
1 bit
Flow Control
None
Software specification
1.
When input cmd fail, e.g. correct input is “*pow=?#” but input “*po=?#”, or input “*mute=on#”
while projector is already mute, it will show “*Illegal format#”.
2.
When input cmd but projector has no such function item, e.g. input “*sour=RGB2#” but
projector has no RGB2 connector, it will show “*Unsupported item#”.
3.
When cmd and function are both workable, but it’s not under the status which cmd can be
executed, e.g. input “*asp=4:3#” while not connecting source, it will show “*Block item#”.
4.
When input “query” cmd (with “?”), e.g. input “*sour=?#”, it will echo the same input strings
with some value.
5.
Press “Enter” key after”
>
”, it should be no echo and skip to the next row.
6.
Press “Space” and “Enter” key after”
>
”, it will echo”*Illegal format#”
Command Category
Refer to Appendix 2
Summary of Contents for MX613ST
