BenQ MW855UST User Manual Download Page 67

Page: 67 / 77

Maintenance

Resetting the lamp timer

11. After the startup logo, open the On-Screen Display (OSD) menu. Go to the

SYSTEM SETUP: Advanced > Lamp Settings

menu. Press

MODE/ENTER

The

Lamp Settings

page displays. Highlight

Reset lamp timer

. A warning

message displays asking if you want to reset the lamp timer. Highlight

Reset

and

press

MODE/ENTER

. The lamp time will be reset to '0'.

Do not reset if the lamp is not new or replaced as this could cause damage.

Cleaning the projector mirror

Remove dust with a “Bellows/Lens Blower” readily available from Camera shops to prevent

scratching the mirror when subsequently wiped.

•

Always turn the projector off and allow to cool for at least 30 minutesprior to cleaning.

•

Never touch the projector mirror or Lens directly by hand.

Summary of Contents for MW855UST














































































Search results

Summary of Contents for MW855UST

Reviews:

Related manuals for MW855UST

Brands by name

Popular brands

BenQ MW855UST, User Manual

Search results

Summary of Contents for MW855UST

Reviews:

Related manuals for MW855UST

Brands by name

Popular brands